Industrial valves - 1 1/2"
Needle valve - stainless steel, female/female
Needle valve -stainless steel -female/female, straightway form, Tmax=250°C ( Please note: T > 50°C - pressure reduction), seat diameter: 22 mm, body: stainless steel-1.4571, stem: stainless steel-1.4571, stem sealing: PTFE, handwheel: steel
2-way control ball valve - brass, kvs=16 - electr. operated (24 V), modulating
2-way control ball valve -brass, kvs= 16 m3/h, flow characteristic: equal percentage, max. differential pressure: 3, 5 bar, leakage rate: A (air-bubble-tight), T= -10 bis 120°C, threaded end connections acc. to ISO7/1, body: brass-nickel plated, ball: stainless steel, seats: PTFE+Viton, stem: stainless steel, stem seals: EPDM, characterising disc: Tefzel Electric actuator SR24A.SR - 24 V AC/DC, modulatingIP 54, plastic housing, PVC cable 1 m ( 4x0, 75 mm2), power consumption in operation: 2, 5 W / powerconsumption in rest position: 0, 4 W, ambient temperature: -30°C up to 50°C, manual ovveride, optical position indicator, maintenance- free on request: limit switches for signal Open/Close, with potentiometer, ...
3-way ball valve - stainless steel, T-bored
3-way ball valve -stainless steel with T-bore, reduce bore, T= -20 up to 180°C, sealed on all ports, not overcutting free, threaded connectionacc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - double actingtype 1BRD060, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
Pressure reducing valve, female/female, for water and non-viscous fluids, Pressure reducing valve for water, non-viscous fluids and neutral and non-combustible gases, pressure-relieved single seated valve, threaded ends acc. to ISO 228, with inside dirt-trap strainer, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: cast iron, diaphragm: NBR, seals: NBR, inlet pressure: max. 25 bar, outlet pressure: adjustable 1, 5 up to 10 bar, minimum diff. pressure: 1 bar, Tmax= 75°C, kvs= 9 m3/h
G 1 1/2", T-Bohrung, E-Antrieb 230 V
3-way ball valve -brass -electr. operated (230 V), T-bore, T= -10 up to 100°C, max. differential pressure: 3, 5 bar, threaded end connections acc. to ISO7/1, body: brass-nickel plated, ball: brass-chrome plated, seats: PTFE+EPDM, stem: brass-nickel plated, stem seals: EPDM Electric actuator NR230A - 230 V ACwith 90° rotation, operating time: 90 s, IP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 2, 5 W / power consumption in rest position: 0, 4 W, ambient temperature: 0°C up to 50°C, manual ovveride, optical position indicator, maintenance-free on request: limit switches for signal Open/Close, with potentiometer, IP 66/67, ...
3-way ball valve - brass, T-bore - electrically operated (24 V)
3-way ball valve -brass -electr. operated (24 V), T-bore, T= -10 up to 100°C, max. differential pressure: 3, 5 bar, threaded end connections acc. to ISO7/1, body: brass-nickel plated, ball: brass-chrome plated, seats: PTFE+EPDM, stem: brass-nickel plated, stem seals: EPDM Electric actuator NR24A - 24 V AC/DCwith 90° rotation, operating time: 90 s, IP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 1, 5 W / power consumption in rest position: 0, 2 W, ambient temperature: 0°C up to 50°C, manual ovveride, optical position indicator, maintenance-free on request: limit switches for signal Open/Close, with potentiometer, IP 66/67, ...
Pressure reducing valve, female/female, for neutral gases, Pressure reducing valve for neutral and non-combustible gases, non-pressure-relieved single seated valve, threaded ends acc. to ISO 228, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: cast iron, diaphragm: NBR, seals: NBR, inlet pressure: max. 25 bar, outlet pressure: adjustable 1, 5 up to 8 bar, highest reduction ratio: 10:1, Tmax= 75°C, kvs= 4, 5 m3/h
2-way ball valve - stainless steel, female/female
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 180°C, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonPneumatic actuator - single actingType 1BRE100, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
2-way ball valve - stainless steel, female/female - with DVGW approval for drinking water (PN10)
2-way ball valve -stainless steel -with DVGW approval for drinking water (PN10), acc. to EN13828, full bore, 2-piece design, T= 0 up to 65°C, face to face acc. to DIN 3202-M3, threaded end connections acc. to ISO 7/1, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonPneumatic actuator - single actingType 1BRE060, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
2-way ball valve - stainless steel, female/female
2-way ball valve -stainless steel -female/female, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 M3, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - single actingType 1BRE150, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
3-way ball valve - brass, T-bore, pneumatically operated (single acting)
3-way ball valve -brass with L-bore, L-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMPneumatic actuator - single actingcontrol pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
3-way ball valve - brass, L-bore, pneumatically operated (single acting)
3-way ball valve -brass with L-bore, L-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMPneumatic actuator - single actingcontrol pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
2-way ball valve - brass, electr. operated (230 V) - spring return
2-way ball valve -brass -female/female -electr. operated (24 V) -spring-return, full bore, T= -10 up to 120°C, max. differential pressure: 10 bar, threaded end connections acc. to ISO7/1, body: brass- nickel plated, ball: stainless steel, stem: stainless steel, seats: PTFE+EPDM, stem seals: EPDM Electric actuator NRF230A - spring return electric actuator (90°), torque: 4 Nm, 24 V DC, IP 54, running time: 75 s, runnning time emergency setting position: < 20 s, plastic housing, 1 m cable ( 2 x 0, 75 mm2), power consumption in operation: 6 W, power consumption in rest position: 2, 5 W, service life: min. 60.000 emergency positions, ambient temperature: T= 0 bis +50°C, manual override, position indication, maintenance-freeDirection of rotation spring-return (selectable): Deenergised NC - valve closed, Deenergised NO - valve open
2-way ball valve - brass, electr. operated (24 V) - spring return
2-way ball valve -brass -female/female -electr. operated (24 V) -spring-return, full bore, T= -10 up to 120°C, max. differential pressure: 10 bar, threaded end connections acc. to ISO7/1, body: brass- nickel plated, ball: stainless steel, stem: stainless steel, seats: PTFE+EPDM, stem seals: EPDM Electric actuator NRF24A - spring return electric actuator (90°), torque: 10 Nm, 24 V DC, IP 54, running time: 75 s, runnning time emergency setting position: < 20 s, plastic housing, 1 m cable ( 2 x 0, 75 mm2), power consumption in operation: 6 W, power consumption in rest position: 2, 5 W, service life: min. 60.000 emergency positions, ambient temperature: T= 0 bis +50°C, manual override, position indication, maintenance-freeDirection of rotation spring-return (selectable): Deenergised NC - valve closed, Deenergised NO - valve open
3-way control ball valve - brass, kvs= 16 - electr. operated (24 V), 3-point
3-way control ball valve -brass -electr. operated (24 V), 3-point, kvs= 0, 25 m3/h, flow characteristic: equal percentage, max. differential pressure: 3, 5 bar, leakage rate: A-AB (air-bubble-tight), T= -10 bis 120°C, threaded end connections acc. to ISO7/1, body: brass-nickel plated, ball: stainless steel, seats: PTFE+Viton, stem: stainless steel, stem seals: EPDM, characterising disc: Tefzel Electric actuator SR24A - 24 V AC/DC, 3-pointIP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 2, 5 W / powerconsumption in rest position: 0, 2 W, ambient temperature: -30°C up to 50°C, manual ovveride, optical position indicator, maintenance- free on request: limit switches for signal Open/Close, with potentiometer, ...
2-way ball valve - stainless steel, female/female
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 150°C, threaded end connections acc. to ISO 7/1, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+Vitonapprovals: DVGW- approval for gases acc. to G260 and G262 up to 5 bar (MOP 5), TA LuftPneumatic actuator - single actingType 1BRE100, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
2-way control ball valve - brass, kvs= 16 - electr. operated (24 V), modulating - spring return
2-way control ball valve -brass, kvs= 16 m3/h, flow characteristic: equal percentage, max. differential pressure: 3, 5 bar, leakage rate: A (air-bubble-tight), T= -10 bis 120°C, threaded end connections acc. to ISO7/1, body: brass-nickel plated, ball: stainless steel, seats: PTFE+Viton, stem: stainless steel, stem seals: EPDM, characterising disc: Tefzel Electric actuator SRF24.SR - 24 V AC/DC, modulating - spring return (NC)electric actuator (90°), 24 V DC, IP 54, deenergised closed (NC), position signal: 0...10 V DC, position feedback: 2...10 V DC, running time: 90 s, runnning time emergency setting position: < 20 s, plastic housing, 1 m cable ( 4 x 0, 75 mm2), power consumption in operation: 5, 5 W, power consumption in rest position: 3 W, service life: min. 60.000 emergency positions, ambient temperature: T= -30 bis +50°C, manual override, position indication, maintenance-free
3-way ball valve - brass, L-bore - electrically operated (230 V)
3-way ball valve -brass -electr. operated (230 V), L-bore, T= -10 up to 100°C, max. differential pressure: 3, 5 bar, threaded end connections acc. to ISO7/1, body: brass-nickel plated, ball: brass-chrome plated, seats: PTFE+EPDM, stem: brass-nickel plated, stem seals: EPDM Electric actuator NR230A - 230 V ACwith 90° rotation, operating time: 90 s, IP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 2, 5 W / power consumption in rest position: 0, 4 W, ambient temperature: 0°C up to 50°C, manual ovveride, optical position indicator, maintenance-free on request: limit switches for signal Open/Close, with potentiometer, IP 66/67, ...
3-way ball valve - brass, L-bore - electrically operated (24 V)
3-way ball valve -brass -electr. operated (24 V), L-bore, T= -10 up to 100°C, max. differential pressure: 3, 5 bar, threaded end connections acc. to ISO7/1, body: brass-nickel plated, ball: brass-chrome plated, seats: PTFE+EPDM, stem: brass-nickel plated, stem seals: EPDM Electric actuator NR24A - 24 V AC/DCwith 90° rotation, operating time: 90 s, IP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 1, 5 W / power consumption in rest position: 0, 2 W, ambient temperature: 0°C up to 50°C, manual ovveride, optical position indicator, maintenance-free on request: limit switches for signal Open/Close, with potentiometer, IP 66/67, ...
2/2-way Solenoid valve - brass, with force lifting, G 1/4" up to G 2", female/female, operating pressure: 0...10 bar, 230 V AC (normally closed) - for neutral gases and liquids
2/2-way Solenoid valve -brass, with force lifting, 230 V AC (normally closed), for neutral gases and liquids, without differential pressure, DN 40, kv= 25 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, damped operation, suitable for vacuum, body: brass, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override