Industrial valves - Angle - Pneumatically - DN 15 - Approval - Without approval

Product filter

Article found: 181

Stop valve - cast steel, with gland seal - straightway form

Stop valve -cast steel -with gland seal, straightway form, Tmax=450°C (22, 2 bar), metallic seat, face to face acc. to EN 558-1 row 1, body: GS-C25N, bonnet: C22.8/GS-C25N, stem: stainless steel-1.4021, plug/seat: stainless steel-1.4021with handwheel

3-way wafer-type ball valve - steel/40, T-bored

3-way ball valve -wafer type -steel, T-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, handlever: steel-galv., Please note the flow direction !

2-way wafer-type ball valve - stainless steel with integral sealing

2-way ball valve -wafer type -stainless steel -with integral sealing full bore, T= -20 up to 180°C, flanges with threaded holes (metric) ,, body: stainless steel-1.4401/1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seals: PTFE+FKM, handlever: stainless steel, approvals: DVGW- approval for gases up to PN 16 acc. to G260 and G262, TA- Luft, Fire-Safe

3-way wafer-type ball valve - steel/40, L-bored

3-way ball valve -wafer type -steel, L-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, handlever: steel-galv.,

2-way stop valve - stainless steel, butt welding ends

2-way Stop valve stainless steel -butt welding ends -pneumatic actuator, mounting in any position, T= -10°C up to 180°C, ambient temperature: -10 up to 60°C, pressure range: 0-16 bar, butt welding ends acc. to DIN 11850.2, body: stainless steel-1.4408, seat: PTFE, stem packing: PTFEPneumatic actuator - single acting (closing with flow direction)piston diameter= 40 mm, control pressure: 6-8 bar, actuator: stainless steelmedia: clean air (ISO 8573-1:2001)

2-way ball valve - stainless steel, butt weld

2-way ball valve -stainless steel -butt weld, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 S13, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFEPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)

Swing type check valve, flange type - body: GG-25 / seat: NBR, DN 15 up to DN 300, PN 16/10, full bore - short type

Swing type check valve, flange type -GG-25 / NBR, full bore -short type, T= -10°C up to max. 70°C, body: GG-25 / EN-JL1040, disc: steel, seat: NBR, body seal: NBRon request:body made of GGG-40; seat: EPDM, PTFE, Viton; disc made of stainless steel

2-way wafer-type ball valve - stainless steel pressure up to 63 bar

2-way ball valve -wafer type -stainless steel -pressure up to 63 bar full bore, T= -20 up to 180°C, flanges with threaded holes (metric) ,, body: stainless steel-AISI316L, ball: stainless steel-1.4408, seats: PTFE, stem seals: PTFE+FKM, handlever: stainless steel

2-way ball valve - stainless steel, butt weld

2-way ball valves -stainless steel -butt weld, full bore, 2- piece design, anti-static device, T= -20 up to 180°C, butt weld ANSI B16.25, body: stainless steel-1.4404, ball: stainless steel-1.4404, seats: PTFE, stem seal: PTFE, handle: steel-zinc plated

DN 15, Flansch/Verschlußkappe

,

Stop valve GGG-40.3, with bellow seal - straightway form

Stop valve GGG-40.3 -with bellow seal, straightway form, maintenance-free, metallic seat, Tmax=350°C (11, 2 bar), face to face acc. to EN 558-1 row 1, double wall bellow seal, with throttling plug, Lubricating nipple as locking device, secondary sealing: gland packing, position indicator, body: GGG-40.3, bonnet: GGG-40.3, stem: stainless steel-1.4021, plug/seat: stainless steel-1.4021, bellow: stainless steel-1.4571, with handwheel

2-way wafer-type ball valve - stainless steel pneumatically operated (double acting)

2-way ball valve -wafer type -stainless steel, full bore, T= -20 up to 180°C, flanges with threaded holes (metric), mounting flange acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonPneumatic actuator - double actingtype 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)

Strainer, Y-pattern, Cast steel

Strainer, Y-pattern, Cast steel -with flanges, face to face acc. to EN 558-1 row 1, mesh width: 1 mm body: GS-C25N, screen: stainless steel-1.4301, gasket: pure graphite

Stop valve GGG-40.3, with bellow seal - straightway form

Stop valve GGG-40.3 -with bellow seal -PN 25, straightway form, maintenance-free, metallic seat, Tmax=350°C (17, 5 bar), face to face acc. to EN 558-1 row 1, double wall bellow seal, with throttling plug, Lubricating nipple as locking device, secondary sealing: gland packing, position indicator, body: GGG-40.3, bonnet: GGG-40.3, stem: stainless steel-1.4021, plug/seat: stainless steel-1.4021, bellow: stainless steel-1.4571, with handwheel

2-way stop valve - stainless steel, butt welding ends

2-way Stop valve stainless steel -butt welding ends -pneumatic actuator, mounting in any position, T= -10°C up to 180°C, ambient temperature: -10 up to 60°C, pressure range: 0-16 bar, butt welding ends acc. to DIN 11850.2, body: stainless steel-1.4408, seat: PTFE, stem packing: PTFEPneumatic actuator - single acting (closing with and against flow direction)piston diameter= 50 mm, control pressure: 6-8 bar, actuator: stainless steelmedia: clean air (ISO 8573-1:2001)

Strainer, Y-pattern, Cast steel with fine screen

Strainer, Y-pattern, Cast steel -with flanges, fine screen, face to face acc. to EN 558-1 row 1, mesh width: 0, 25 mm body: GS-C25N, screen: stainless steel-1.4301, gasket: pure graphite

2-way ball valve PVC-U, seats PTFE, solvent socket

2-way ball valve -PVC-U -solvent socket, full bore, T= 0 up to 60°C, solvent socket d= 20mm, radial installation or removal, body: PVC-U, ball: PVC-U, seats: PTFE, stem seals: EPDM (on request: FPM)Pneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)

2-way ball valve - stainless steel, butt weld

2-way ball valve -stainless steel -butt weld, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 S13, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFEPneumatic actuator - single actingType 1BRE030, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)

2-way Flange ball valve - stainless steel pneumatically operated (double acting)

2-way ball valve -flange type -stainless steel, split body, full bore, T= -20 up to 180°C, face to face acc. to EN 558-1 row 27, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: RTFE, stem seals: PTFE+VitonPneumatic actuator - double actingtype 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)

3-way ball valve - stainless steel, L-bore

3-way ball valve -stainless steel with L-bore, full bore, T= -20 up to 180°C, sealed on all ports, not overcutting free, mounting flange acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+Viton, handlever: stainless steel (lockable)

(1)All prices are in EURO plus the current legally valid value added tax.
*Only for companies, tradesmen, associations, craft businesses, public authorities or self-employed freelancers within the meaning of § 14 BGB.