Industrial valves - Wafer type - DN 25

Product filter

Article found: 16

2-way ball valve - steel, PN 140, butt weld

2-way ball valves -steel -butt weld, full bore, 3- piece design, T= -10 up to 150°C, butt weld ANSI B16.25, body: steel-A216-WCB, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE, handlever: stainless steel

2-way ball valve - steel, butt weld

2-way ball valves -steel -butt weld, full bore, 2- piece design, anti-static device, T= -10 up to 180°C, butt weld ANSI B16.25, body: steel-A105, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE, handle: steel-zinc plated

3-way wafer-type ball valve - steel/40, T-bored

3-way ball valve -wafer type -steel, T-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, handlever: steel-galv., Please note the flow direction !

3-way wafer-type ball valve - steel/40, L-bored

3-way ball valve -wafer type -steel, L-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, handlever: steel-galv.,

Strainer, Y-pattern, Cast steel

Strainer, Y-pattern, Cast steel -with flanges, face to face acc. to EN 558-1 row 1, mesh width: 1 mm body: GS-C25N, screen: stainless steel-1.4301, gasket: pure graphite

Strainer, Y-pattern, Cast steel with fine screen

Strainer, Y-pattern, Cast steel -with flanges, fine screen, face to face acc. to EN 558-1 row 1, mesh width: 0, 25 mm body: GS-C25N, screen: stainless steel-1.4301, gasket: pure graphite

3-way wafer-type ball valve - steel, L-bored

3-way ball valve -wafer type -steel, L-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, Pneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)

3-way wafer-type ball valve - steel, T-bored

3-way ball valve -wafer type -steel, T-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKMPlease note the flow direction !Pneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)

3-way wafer-type ball valve - steel, L-bored

3-way ball valve -wafer type -steel, L-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKMPneumatic actuator - single actingType 1BRE030, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)

3-way wafer-type ball valve - steel, T-bored

3-way ball valve -wafer type -steel, T-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKMPlease note the flow direction !Pneumatic actuator - single actingType 1BRE060, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)

3-way wafer-type ball valve - steel, L-bored - electrically operated (230 V)

3-way ball valve -wafer type -steel, L-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, Electric actuator 1AH020 - 230 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 85-240 V AC/DC, operating time: 11s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 01 A - 0, 21 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override

3-way wafer-type ball valve - steel, T-bored - electrically operated (230 V)

3-way ball valve -wafer type -steel, T-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKMPlease note the flow direction !Electric actuator 1AH020 - 230 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 85-240 V AC/DC, operating time: 11s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 01 A - 0, 21 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override

3-way wafer-type ball valve - steel, L-bored - electrically operated (24 V)

3-way ball valve -wafer type -steel, L-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, Electric actuator 1AL020 - 24 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 12-24 V AC/DC, operating time: 17s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 18 A - 2, 14 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override

3-way wafer-type ball valve - steel, T-bored - electrically operated (24 V)

3-way ball valve -wafer type -steel, T-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKMPlease note the flow direction !Electric actuator 1AL020 - 24 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 12-24 V AC/DC, operating time: 17s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 18 A - 2, 14 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override

3-way wafer-type ball valve - steel, L-bored - electrically operated (230 V)

?,

3-way wafer-type ball valve - steel, T-bored - electrically operated (230 V)

?,

(1)All prices are in EURO plus the current legally valid value added tax.
*Only for companies, tradesmen, associations, craft businesses, public authorities or self-employed freelancers within the meaning of § 14 BGB.