Industrial valves - Check valves - 2"
2-way control ball valve - brass, kvs= 25 - electr. operated (24 V), modulating - spring return
2-way control ball valve -brass, kvs= 25 m3/h, flow characteristic: equal percentage, max. differential pressure: 3, 5 bar, leakage rate: A (air-bubble-tight), T= -10 bis 120°C, threaded end connections acc. to ISO7/1, body: brass-nickel plated, ball: stainless steel, seats: PTFE+Viton, stem: stainless steel, stem seals: EPDM, characterising disc: Tefzel Electric actuator SRF24.SR - 24 V AC/DC, modulating - spring return (NC)electric actuator (90°), 24 V DC, IP 54, deenergised closed (NC), position signal: 0...10 V DC, position feedback: 2...10 V DC, running time: 90 s, runnning time emergency setting position: < 20 s, plastic housing, 1 m cable ( 4 x 0, 75 mm2), power consumption in operation: 5, 5 W, power consumption in rest position: 3 W, service life: min. 60.000 emergency positions, ambient temperature: T= -30 bis +50°C, manual override, position indication, maintenance-free
2-way ball valve - stainless steel, female/female
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 150°C, threaded end connections acc. to ISO 7/1, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+Vitonapprovals: DVGW- approval for gases acc. to G260 and G262 up to 5 bar (MOP 5), TA LuftPneumatic actuator - single actingType 1BRE150, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
3-way ball valve - stainless steel, L-bored
3-way ball valve -stainless steel with L-bore, reduce bore, T= -20 up to 180°C, sealed on all ports, not overcutting free, threaded connectionacc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - double actingtype 1BRD150, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
3-way ball valve - brass, T-bore - electrically operated (230 V)
3-way ball valve -brass with T-bore, T-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMElectric actuator 1AH035 - 230 V AC/DCwith 90° rotation, torque: 35 Nm/ 38 Nm, 85-240 V AC/DC, operating time: 11s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 01 A - 0, 24 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
3-way ball valve - brass, T-bore - electrically operated (24 V)
3-way ball valve -brass with T-bore, T-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMElectric actuator 1AL035 - 24 V AC/DCwith 90° rotation, torque: 35 Nm/38 Nm, 12-24 V AC/DC, operating time: 12 s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 33 A - 3, 23 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
3-way ball valve - brass, L-bore - electrically operated (230 V)
3-way ball valve -brass with L-bore, L-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMElectric actuator 1AH035 - 230 V AC/DCwith 90° rotation, torque: 35 Nm/ 38 Nm, 85-240 V AC/DC, operating time: 11s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 01 A - 0, 24 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
3-way ball valve - brass, L-bore - electrically operated (24 V)
3-way ball valve -brass with L-bore, L-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMElectric actuator 1AL035 - 24 V AC/DCwith 90° rotation, torque: 35 Nm/38 Nm, 12-24 V AC/DC, operating time: 12 s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 33 A - 3, 23 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way stop valve - stainless steel", female/female
2-way Stop valve stainless steel -female/female -pneumatic actuator (single acting), mounting in any position, T= -10°C up to 180°C, ambient temperature: -10 up to 60°C, pressure range: 0-16 bar, threaded end connections acc. to ISO 228/1, body: stainless steel-1.4408, seat: PTFE, stem packing: PTFEPneumatic actuator - single acting (closing with flow direction)piston diameter= 80 mm, control pressure: 6-8 bar, actuator: stainless steelmedia: clean air (ISO 8573-1:2001)
3-way ball valve - stainless steel, T-bored
3-way ball valve -stainless steel with T-bore, reduce bore, T= -20 up to 180°C, sealed on all ports, not overcutting free, threaded connectionacc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - double actingtype 1BRD150, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
3-way ball valve - brass - G 2 3/4" male/male, T-bore, electr. operated (230 V)
3-way ball valve -brass -electr. operated (230 V), T-bore, T= +6 up to 100°C, max. differential pressure: 4 bar, threaded end connections acc. to ISO228/1, body: brass-nickel plated, ball: stainless steel, seats: PTFE+Viton, stem: stainless steel, stem seals: EPDM Electric actuator SR230A - 230 V ACwith 90° rotation, operating time: 90 s, IP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 2, 5 W / power consumption in rest position: 0, 4 W, ambient temperature: 0°C up to 50°C, manual ovveride, optical position indicator, maintenance-free on request: limit switches for signal Open/Close, with potentiometer, IP 66/67, ...
3-way ball valve - brass - G 2 3/4" male/male, T-bore, electr. operated (24 V)
3-way ball valve -brass -electr. operated (24 V), T-bore, T= +6 up to 100°C, max. differential pressure: 4 bar, threaded end connections acc. to ISO228/1, body: brass-nickel plated, ball: stainless steel, seats: PTFE+Viton, stem: stainless steel, stem seals: EPDM Electric actuator SR24A - 24 V AC/DCwith 90° rotation, operating time: 90 s, IP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 2 W / power consumption in rest position: 0, 2 W, ambient temperature: 0°C up to 50°C, manual ovveride, optical position indicator, maintenance-free on request: limit switches for signal Open/Close, with potentiometer, IP 66/67, ...
Pressure reducing valve, female/female, for neutral gases, Pressure reducing valve for neutral and non-combustible gases, non-pressure-relieved single seated valve, threaded ends acc. to ISO 228, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: cast iron, diaphragm: NBR, seals: NBR, inlet pressure: max. 25 bar, outlet pressure: adjustable 1, 5 up to 8 bar, highest reduction ratio: 10:1, Tmax= 75°C, kvs= 7, 2 m3/h
2-way ball valve - stainless steel, female/female - electrically operated (230 V)
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 180°C, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonElectric actuator 1AH055 - 230 V AC/DCwith 90° rotation, torque: 55 Nm/ 60 Nm, 85-240 V AC/DC, operating time: 14s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 04 A - 0, 31 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way ball valve - stainless steel, female/female - electrically operated (24 V)
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 180°C, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonElectric actuator 1AL055 - 24 V AC/DCwith 90° rotation, torque: 55 Nm/60 Nm, 12-24 V AC/DC, operating time: 16 s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 33 A - 4, 12 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way stop valve - stainless steel", female/female
2-way Stop valve stainless steel -female/female -pneumatic actuator (single acting), mounting in any position, T= -10°C up to 180°C, ambient temperature: -10 up to 60°C, pressure range: 0-6 bar, threaded end connections acc. to ISO 228/1, body: stainless steel-1.4408, seat: PTFE, stem packing: PTFEPneumatic actuator - single acting (closing with and against flow direction)piston diameter= 80 mm, control pressure: 6-8 bar, actuator: stainless steelmedia: clean air (ISO 8573-1:2001)
3-way control ball valve - brass, kvs= 25 - electr. operated (24 V), modulating - spring return
3-way control ball valve -brass, kvs= 25 m3/h, flow characteristic: equal percentage, max. differential pressure: 3, 5 bar, leakage rate: A-AB (air-bubble-tight), T= -10 bis 120°C, threaded end connections acc. to ISO7/1, body: brass-nickel plated, ball: stainless steel, seats: PTFE+Viton, stem: stainless steel, stem seals: EPDM, characterising disc: Tefzel Electric actuator SRF24.SR - 24 V AC/DC, modulating - spring return (NC)electric actuator (90°), 24 V DC, IP 54, deenergised closed (NC), position signal: 0...10 V DC, position feedback: 2...10 V DC, running time: 90 s, runnning time emergency setting position: < 20 s, plastic housing, 1 m cable ( 4 x 0, 75 mm2), power consumption in operation: 5, 5 W, power consumption in rest position: 3 W, service life: min. 60.000 emergency positions, ambient temperature: T= -30 bis +50°C, manual override, position indication, maintenance-free
2-way ball valve PVC-U, seats PTFE, female/female - electrically operated, 24 V - spring return
2-way ball valve -PVC-U -female/female, full bore, T= 0 up to 60°C, threaded end connections acc. to DIN ISO 228, radial installation or removal, body: PVC-U, ball: PVC-U, seats: PTFE, stem seals: EPDM (on request: FPM)Electric actuator 1RLF024R - spring returnelectric actuator (90°), torque: 20 Nm, 24 V DC, IP 54, running time: 75 s, runnning time emergency setting position: < 20 s, plastic housing, 1 m cable ( 2 x 0, 75 mm2), power consumption in operation: 7 W, power consumption in rest position: 3 W, service life: min. 60.000 emergency positions, ambient temperature: T= 0 bis +50°C, manual override, position indication, maintenance-freeDirection of rotation spring-return (selectable):Deenergised NC - valve closed, Deenergised NO - valve open,
2-way ball valve - stainless steel, female/female - electrically operated (230 V)
2-way ball valve -stainless steel -female/female, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 M3, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonElectric actuator 1AH055 - 230 V AC/DCwith 90° rotation, torque: 55 Nm/ 60 Nm, 85-240 V AC/DC, operating time: 14s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 04 A - 0, 31 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way ball valve - stainless steel, female/female - electrically operated (24 V)
2-way ball valve -stainless steel -female/female, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 M3, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonElectric actuator 1AL055 - 24 V AC/DCwith 90° rotation, torque: 55 Nm/60 Nm, 12-24 V AC/DC, operating time: 16 s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 33 A - 4, 12 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way ball valve PVC-U, seats PTFE, female/female - electrically operated, 230 V - spring return
2-way ball valve -PVC-U -female/female, full bore, T= 0 up to 60°C, threaded end connections acc. to DIN ISO 228, radial installation or removal, body: PVC-U, ball: PVC-U, seats: PTFE, stem seals: EPDM (on request: FPM)Electric actuator 1RHF230R - spring returnelectric actuator (90°), torque: 20 Nm, 230 V AC, IP 54, running time: 75 s, runnning time emergency setting position: < 20 s, plastic housing, 1 m cable ( 2 x 0, 75 mm2), power consumption in operation: 7 W, power consumption in rest position: 3 W, service life: min. 60.000 emergency positions, ambient temperature:T= 0 bis +50°C, manual override, position indication, maintenance-freeDirection of rotation spring-return (selectable):Deenergised NC - valve closed, Deenergised NO - valve open,