Ship valves - Approval - Without approval

Product filter

Article found: 460

2/2-way Solenoid valve - brass, with force lifting, G 1/4" up to G 2", female/female, operating pressure: 0...10 bar, 230 V AC (normally closed) - for neutral gases and liquids

2/2-way Solenoid valve -brass, with force lifting, 230 V AC (normally closed), for neutral gases and liquids, without differential pressure, DN 8, kv= 1, 9 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, damped operation, suitable for vacuum, body: brass, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override

2/2-way Solenoid valve - brass, with force lifting, G 1/4" up to G 2", female/female, operating pressure: 0...10 bar, 24 V DC (normally closed) - for neutral gases and liquids

2/2-way Solenoid valve -brass, with force lifting, 24 V DC (normally closed), for neutral gases and liquids, without differential pressure, DN 8, kv= 1, 9 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, damped operation, suitable for vacuum, body: brass, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override

Check valve for vertical installation - GG 25 soft seat

Check valve -GG-25 -vertical installation -soft seat, flange connection, T= -10°C up to max. 80°C, body: GG-25, disc: GG-25, slide bar: drawn brass, seat: rubber

Butterfly valve - lug type, body: GGG-40 / disc: stainless steel-1.4408 / seat: Viton, DN 32 up to DN 300, PN 16/10

Butterfly Valve -lug type -seat: Viton, soft sealing, centric disc, one piece body, face to face acc. to EN 558-1 row 20, to be mounted between two flanges acc. to DIN EN 1092-1/11/B1 (PN16), working temperature: -25 up to 150°C, body: GGG-40, disc: stainless steel-1.4408, stem: stainless steel-1.4021, seat: Viton, stem sealing: NBR, handlever: DN 32 up to DN 200, gearbox: DN 250 + DN 300

Stop valve (DIN 86251) - GGG-40.3, inner parts: Bronze/SoMs, DN 15 up to DN 300, PN 16/10, with gland seal - angle form

Screw down stop and check valve (SDNR valve), DIN 86252 -GGG-40.3, angle form, with gland seal, Tmax=350°C, metallic seat, face to face acc. to EN 558-8 row 1, body: GGG-40.3, bonnet: GGG-40.3, stem: Bronze-CW453K-b, plug: SoMs59-CW710R-a, seat: Bronze-CC483K, with handwheel

Cast iron Gate Valve with inside screw

Cast iron Gate Valve with inside screw, metallic seats, face to face acc. to EN 558-1 row 15, temperature: -10 up to max. 80°C (on request up to 150°C ), body: GG-25, stem: brass, seats: brass, wedge: brass, handwheel: GG-25

Pneumatic actuator, single acting, 90°

Pneumatic actuator -single acting, Type 1BRE015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)

Position indicator OPEN/CLOSE, double sensor Pepperl+Fuchs, 5 m cable - ATEX

Position indicator OPEN/CLOSE, double sensor Pepperl+Fuchs -ATEX, inductive sensor Pepperl+Fuchs type NCN3-F25-N4, inductive, II 1G Ex ia IIC T6, 8, 2 V DC, Namur, 2- wire, DC Dual NC, IP 67, T= -25 up to 100 °C, output status indication (LED-yellow), housing material: PBT, 5 m cable

Electric actuator 3RL024AR -24 V AC/DC, with 90° rotation, torque: 5 Nm, operating time: 90 s, IP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 1, 5 W / powerconsumption in rest position: 0, 2 W, ambient temperature: -30°C up to 50°C, manual override, optical position indicator, maintenance- free on request: limit switches for signal Open/Close, with potentiometer

Electric actuator 1BH020 -230 V AC, with 90° rotation, torque: 10 Nm, 230 V AC, operating time: 20 s, IP 65, ambient temp.: -5°C up to 55°C, duty: 50%, approx. 0, 67 m cable ( 6 x 0, 75 mm2), plastic housing (PA), optical position indicator, one limit switch for signal, manual overrideoption: add. one limit switch

Electric actuator 1BL010 -24 V DC, with 90° rotation, torque: 10 Nm, 24 V DC, operating time: 4 s, IP 65, ambient temp.: -5°C up to 55°C, duty: 50%, approx. 0, 67 m cable ( 6 x 0, 75 mm2), plastic housing (PA), optical position indicator, one limit switch for signal, manual overrideoption: add. one limit switch

Position indicator OPEN/CLOSE, double sensor Pepperl+Fuchs, 10...30 V DC, 5 m cable

Position indicator OPEN/CLOSE, double sensor Pepperl+Fuchs -10...30 V DC, inductive sensor Pepperl+Fuchs type NBN3-F25-E8, inductive, 10...30 V DC, 3-wire, PNP Dual NO, IP 67, T= -25 up to 70 °C, output status indication (LED-yellow), housing material: PBT, 5 m cable

3-way wafer-type ball valve - steel/40, T-bored

3-way ball valve -wafer type -steel, T-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, handlever: steel-galv., Please note the flow direction !

Swing type check valve - wafer type, PVC-U / EPDM

Swing type check valves -wafer type -PVC-U / PTFE, T= 0°C up to max. 50°C, to be mounted between flanges acc. to DIN PN 6/10, body: PVC-U, disc: PVC-U, seat: PTFEPlease note the max. working pressure in relation to the temperature !on request: body made of PVC-C or PP or PVDF, with spring

Flat body gate valve - GGG-40.3, trim: Bronze/SoMs59, DN 40 up to DN 700, PN 16/10, face to face acc. to EN 558-1 row 14 - non rising stem

Flat body gate valve -Ductile iron -non rising stem, metallic seats, face to face acc. to EN 558-1 row 14, temperature: up to max. 120°C, body/bonnet: GGG-40.3- EN JS1025, stem: SoMs59-CW710R, seats: Rg5-CC491K, wedge: Rg5-CC491K (up to DN 100), GGG-40.3 (DN 125 and higher), handwheel: GG-25

2-way ball valve - stainless steel, butt weld

2-way ball valves -stainless steel -butt weld, full bore, 2- piece design, anti-static device, T= -20 up to 180°C, butt weld ANSI B16.25, body: stainless steel-1.4404, ball: stainless steel-1.4404, seats: PTFE, stem seal: PTFE, handle: steel-zinc plated

3-way wafer-type ball valve - steel/40, L-bored

3-way ball valve -wafer type -steel, L-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, handlever: steel-galv.,

2-way ball valve - brass G 1/4" up to G 3'', PN 40/25, female/female

2-way ball valve -brass -female/female, full bore, T= 0 up to 110°C (for fluids), T= -20 up to 60°C (for gas), threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE, stem seals: FKM, with ISO 5211 mounting pad Pneumatic actuator - single actingcontrol pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)

Foot valve - GG 25 soft seat

Foot valve -GG-25 -soft seat, flange connection, T= -10°C up to max. 80°C, body: GG-25, disc: GG-25, slide bar: drawn brass, seat: rubber, sieve: carbon steel-zinc pl. (holes: 8 mm)

2-way ball valve - stainless steel, female/female

2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 180°C, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)

(1)All prices are in EURO plus the current legally valid value added tax.
*Only for companies, tradesmen, associations, craft businesses, public authorities or self-employed freelancers within the meaning of § 14 BGB.