Industrial valves - Globe valves - 2-way - Manually - 3/4"

Product filter

Article found: 183

Self closing valve - Bronze (Rg5), inner parts: brass, G 1/2" up to G 2", PN 16, with handlever

Self closing valve -Bronze -with handlever, straightway form, T= -10 up to 180°C (up to 16 bar), body: bronze Rg5-CC491K, bonnet: brass-CW614N, stem: brass-CW614N, plug: brass-CW614N, seat: PTFE, handlever: brass-CW614N

G 1/2"/ 1", nicht neutrale Gase u. Dämpfe

Pressure reducing valve, female/female, for water and non-viscous fluids, Pressure reducing valve for water, non-viscous fluids and neutral and non-combustible gases, pressure-relieved single seated valve, threaded ends acc. to ISO 228, with inside dirt-trap strainer, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: brass, diaphragm: NBR, seals: NBR, inlet pressure: max. 25 bar, outlet pressure: adjustable 1, 5 up to 10 bar, minimum diff. pressure: 1 bar, Tmax= 75°C, kvs=2, 9 m3/h

Drain cock - stainless steel", PN 6, male thread x straight outlet

Drain cock -stainless steel, male thread x straight outlet, max. 6 bar, T= -10° up to 50°C, bore: 8, 5 mm body: stainless steel-1.4571, handle: Polypropylene

Drain cock - stainless steel", PN 6, male thread x cone end

Drain cock -stainless steel, male thread x cone end, max. 6 bar, T= -10° up to 50°C, bore: 8, 5 mm body: stainless steel-1.4571, handle: Polypropylene

G 3/4", Preßluft - 0,2 bis 30 bar

,

Drain cock - stainless steel", PN 6, male thread x hose nipple

Drain cock -stainless steel, male thread x hose nipple, max. 6 bar, T= -10° up to 50°C, bore: 5 mm ; hose nipple: 13, 5 mmbody: stainless steel-1.4571, handle: Polypropylene

2-way ball valve - brass pneumatically operated (double acting)

2-way ball valve -brass -female/female, full bore, T= 0 up to 110°C (for fluids), T= -20 up to 60°C (for gas), threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE, stem seals: FKMPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)

2/2-way Solenoid valve - brass, indirectly solenoid actuated, G 1/4" up to G 2", PN16, female/female, operating pressure: 0,1...16/10 bar, 230 V AC (normally closed) - for neutral gases and liquids

2/2-way Solenoid valve -brass, 24 V DC (normally closed), indirectly solenoid actuated, for neutral gases and liquids, DN 20, kv= 6, 1 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0, 1 up to 16 bar, IP 65, determined flow direction, damped operation, body: brass, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override

2/2-way Solenoid valve - brass, indirectly solenoid actuated, G 1/4" up to G 2", PN16, female/female, operating pressure: 0,1...16/10 bar, 24 V DC (normally closed) - for neutral gases and liquids

2/2-way Solenoid valve -brass, 24 V DC (normally closed), indirectly solenoid actuated, for neutral gases and liquids, DN 20, kv= 6, 1 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0, 1 up to 16 bar, IP 65, determined flow direction, damped operation, body: brass, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override

Pressure reducing valve, female/female, for neutral gases, Pressure reducing valve for neutral and non-combustible gases, non-pressure-relieved single seated valve, threaded ends acc. to ISO 228, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: brass, diaphragm: NBR, seals: NBR, inlet pressure: max. 25 bar, outlet pressure: adjustable 1, 5 up to 8 bar, highest reduction ratio: 10:1, Tmax= 75°C, kvs= 1, 3 m3/h

2-way ball valve - brass pneumatically operated (single acting)

2-way ball valve -brass -female/female -ISO mounting pad, full bore, T= 0 up to 110°C (for fluids), T= -20 up to 60°C (for gas), threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE, stem seals: FKMPneumatic actuator - single actingcontrol pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)

2-way ball valve - stainless steel, female/female

2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 180°C, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)

Needle valve - stainless steel, female/female

Needle valve -stainless steel -female/female, straightway form, Tmax=250°C ( Please note: T > 50°C - pressure reduction), seat diameter: 9 mm, body: stainless steel-1.4571, stem: stainless steel-1.4571, stem sealing: PTFE, handwheel: plastic

2-way ball valve - stainless steel, female/female

2-way ball valve -stainless steel -female/female, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 M3, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)

3-way ball valve - brass, T-bore, pneumatically operated (double acting)

3-way ball valve -brass with L-bore, L-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)

3-way ball valve - brass, L-bore, pneumatically operated (double acting)

3-way ball valve -brass with L-bore, L-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)

2/2-way Solenoid valve - brass, with force lifting, G 1/4" up to G 2", female/female, operating pressure: 0...10 bar, 230 V AC (normally closed) - for neutral gases and liquids

2/2-way Solenoid valve -brass, with force lifting, 230 V AC (normally closed), for neutral gases and liquids, without differential pressure, DN 20, kv= 5, 8 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, damped operation, suitable for vacuum, body: brass, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override

2/2-way Solenoid valve - brass, with force lifting, G 1/4" up to G 2", female/female, operating pressure: 0...10 bar, 24 V DC (normally closed) - for neutral gases and liquids

2/2-way Solenoid valve -brass, with force lifting, 24 V DC (normally closed), for neutral gases and liquids, without differential pressure, DN 20, kv= 5, 8 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, damped operation, suitable for vacuum, body: brass, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override

2-way ball valve - brass, electr. operated (230 V AC)

2-way ball valve -brass -female/female -electr. operated (230 V), full bore, T= -10 up to 120°C, max. differential pressure: 10 bar, threaded end connections acc. to ISO7/1, body: brass- nickel plated, ball: stainless steel, stem: stainless steel, seats: PTFE+EPDM, stem seals: EPDM Electric actuator LR230A - 230 V ACwith 90° rotation, torque: 20 Nm, operating time: 90 s, IP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 1, 5 W / powerconsumption in rest position: 0, 4 W, ambient temperature: 0°C up to 50°C, manual ovveride, optical position indicator, maintenance- free on request: limit switches for signal Open/Close, with potentiometer, IP 66/67, ...

2-way ball valve - brass, electr. operated (24 V)

2-way ball valve -brass -female/female -electr. operated (24 V), full bore, T= -10 up to 120°C, max. differential pressure: 10 bar, threaded end connections acc. to ISO7/1, body: brass- nickel plated, ball: stainless steel, stem: stainless steel, seats: PTFE+EPDM, stem seals: EPDM Electric actuator LR24A - 24 V AC/DCwith 90° rotation, torque: 20 Nm, operating time: 90 s, IP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 1 W / powerconsumption in rest position: 0, 2 W, ambient temperature: 0°C up to 50°C, manual ovveride, optical position indicator, maintenance- free on request: limit switches for signal Open/Close, with potentiometer, IP 66/67, ...

(1)All prices are in EURO plus the current legally valid value added tax.
*Only for companies, tradesmen, associations, craft businesses, public authorities or self-employed freelancers within the meaning of § 14 BGB.